Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Powertrain Control Module (Pcm)/Vehicle Control Module (VCM)
Vehicles equipped with 6.0L engines utilize a PCM. Vehicles equipped with 4.3L, 5.0L, 5.7L and 7.4L engines utilize a VCM.
The PCM/VCM controls TCC, pressure control solenoid (hydraulic pressure), and shift solenoid valves 1-2 and 2-3. In addition, PCM/VCM controls ignition, fuel and emission devices related to engine.
The PCM/VCM receives electronic signals from sensors and switches. These signals help PCM/VCM determine when to operate various relays and solenoids related to engine and transmission components. On "C" and "K" series equipped with 5.7L and 7.4L engines, VCM is located in engine compartment, near master cylinder. On "C" and "K" series equipped with 6.0L engine, PCM is located at left front of engine compartment. On "G" series, VCM is located in engine compartment on wheelwell. On "P" series, VCM is located on radiator support.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.