Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Balancing Procedure
Important: The refrigerant oil in the A/C system must be balanced during compressor replacement.
- The replacement compressor is shipped with 80 ml (2.7 oz) of refrigerant oil.
- Compare the amount of refrigerant oil recorded during compressor removal to the amount of refrigerant oil shipped in the replacement compressor.
If the amount of refrigerant oil drained and recorded from the removed compressor is:
- Less than 80 ml (2.7 oz)
Leave the 80 ml (2.7 oz) in the replacement compressor.
- More than 80 ml (2.7 oz)
Add to the compressor the difference between the 80 ml (2.7 oz) and the amount drained.
- Less than 80 ml (2.7 oz)
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.