Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1999PICKUP C2500, 2D PICKUP, 6.5 F, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 671 (HEATING, VENTILATION AND AIR CONDITIONING)REPAIR INSTRUCTIONSCOMPRESSOR RELAY REPLACEMENTREMOVAL PROCEDURE
1999 Chevrolet Pickup C2500, 2D Pickup, 6.5 F, Standard
Removal Procedure
1999 Chevrolet Pickup C2500, 2D Pickup, 6.5 F, StandardSECTION Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the underhood relay center knob (1).
- Remove the underhood relay center cover (2).
- Remove the A/C compressor control relay (13) from the electrical center.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.