Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1999METRO L4-079 1.3L VIN 2 MFIREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTFUEL DELIVERY AND AIR INDUCTIONACCELERATOR PEDALSERVICE AND REPAIR
1999 Chevrolet Metro L4-079 1.3L VIN 2 MFI
Accelerator Pedal: Service and Repair
1999 Chevrolet Metro L4-079 1.3L VIN 2 MFISECTION Service and Repair
REMOVAL PROCEDURE
1. Disconnect the accelerator control cable (1) from the accelerator pedal assembly (2).
2. Remove the C-clip (3) from the accelerator pedal assembly pivot.
3. Remove the accelerator pedal assembly (2) and spring from the mounting bracket (4).
INSTALLATION PROCEDURE
1. Install the accelerator pedal assembly (2) and spring to the mounting bracket (4).
2. Install the C-clip (3) to the accelerator pedal assembly pivot.
3. Connect the accelerator control cable (1) to accelerator pedal assembly (2).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.