Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit Description
Power is supplied to the EBCM relay terminal No. 85 (Yellow/Green wire), from REAR DEFG fuse (15-amp) located in the junction block. The EBCM grounds EBCM relay terminal No. 86 (Yellow/Blue wire) to close the EBCM relay contacts. When the contacts close, power is then supplied from ABS Fuse (50-amp) to EBCM connector C2 terminal "A" through EBCM relay terminals No. 30 (White/Blue wire) and No. 87 (White wire).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.