Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998SUBURBAN K2500, 7.4 J, PART TIMEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 946 (PROPELLER SHAFT)REPAIR INSTRUCTIONSCENTER BEARING INSTALLATIONINSTALLATION PROCEDURETOOL REQUIRED
1998 Chevrolet Suburban K2500, 7.4 J, Part Time
Tool Required
1998 Chevrolet Suburban K2500, 7.4 J, Part TimeSECTION Tool Required
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
J 44870 Yoke Installer. See Special Tools .
- Using J 44870 , install the support bearing on the drive shaft until it seats firmly. See Special Tools .
- Align the splines on the shaft and the splines on the yoke.
- Using J 44870 , install the yoke (2) on the drive shaft (1) until the lock ring groove is visible. See Special Tools .
- Install the lock ring (1) in the groove.
- Install the universal joint caps and the retaining clips.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.