OnStar® Button Assembly

The OnStar® button assembly may be part of the rear view mirror on some vehicles and a separate unit on others. The button assembly is comprised of the three buttons and a status LED. The buttons are defined as follows:

• The Answer/End Call button, which is black with a white "dot", allows the user to answer and end calls or initiate the personal calling feature if equipped.
• The blue OnStar® Call Center button, which displays the OnStar® logo, allows the user to connect to the OnStar® Call Center.
• The red Emergency button sends a high priority emergency call to the OnStar® Call Center when pressed.

The OnStar® button assembly receives ten volts on the keypad supply voltage circuit. When pressed, each button completes a circuit across a resister allowing a specific voltage to be returned to the VIU on the keypad signal circuit. Depending upon the voltage range returned, the VIU is able to identify which button has been pressed.

The OnStar® button assembly status LED is green when the system is on and operating normally. When the status LED is green and flashing, it is an indication that a call is in progress. When the LED is red, this indicates a system malfunction is present. The OnStar® LED is controlled by the VIU over the keypad red LED signal circuit and the keypad green LED signal circuit.