Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998SUBURBAN K2500, 7.4 J, PART TIMEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 76 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)TORQUE SPECIFICATIONS
1998 Chevrolet Suburban K2500, 7.4 J, Part Time
Torque Specifications
1998 Chevrolet Suburban K2500, 7.4 J, Part TimeSECTION Torque Specifications
WARNING: This page is about a different car, the 2000 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft-lbs N.m |
|---|---|
| Steering wheel nut | 30 (41) |
| Inch-lbs N.m | |
| Side impact air bag module nuts | 45 (5) |
| Heater & A/C control assembly screws | 16 (1.8) |
| Instrument panel trim pad screws | 18 (2) |
| Lower steering column cover screws | 31 (3.5) |
| Passenger air bag module bolts | 80 (9) |
| Radio screws | 16 (1.8) |
| Sensing & Diagnostic Module (SDM) bolts | 80 (9) |
| Side Impact Sensor (SIS) bolts | 80 (9) |
| Upper steering column cover screws | 13 (1.5) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.