SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998SUBURBAN K2500, 7.4 J, PART TIMEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 627 (BODY REAR END)REPAIR INSTRUCTIONSTRIM PANEL REPLACEMENT - LIFTGATE (AZTEK)REMOVAL PROCEDURE
1998 Chevrolet Suburban K2500, 7.4 J, Part Time

Removal Procedure

1998 Chevrolet Suburban K2500, 7.4 J, Part TimeSECTION Removal Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Remove the lower liftgate trim panel sides by pulling the left and right sides from the liftgate frame.
    Fig 1: View Of Lower Liftgate Trim Panel (Aztek)
    GM624452Courtesy of GENERAL MOTORS CORP.
  3. Remove the lower liftgate trim panel from the pinch-weld flange by pulling up from the pinch-weld flange.
  4. Remove the lower liftgate trim panel from the vehicle.
  5. Remove the upper liftgate trim panel sides by pulling the left and right sides from the liftgate frame.
    Fig 2: Identifying Upper Liftgate Trim Panel (Aztek)
    GM624443Courtesy of GENERAL MOTORS CORP.
  6. Remove the upper liftgate trim panel from the pinch-weld flange by pulling up from the pinch-weld flange.
  7. Remove the upper liftgate trim panel from the vehicle.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.