SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998SUBURBAN K2500, 7.4 J, PART TIMEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 542 (SEAT SYSTEM)REPAIR INSTRUCTIONSSEAT CUSHION FRAME REPLACEMENT - FRONTINSTALLATION PROCEDURE
1998 Chevrolet Suburban K2500, 7.4 J, Part Time

Installation Procedure

1998 Chevrolet Suburban K2500, 7.4 J, Part TimeSECTION Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect all required wiring harnesses to the front seat cushion frame.
  2. Install the front seat cushion to the front seat cushion frame. Refer to SEAT CUSHION REPLACEMENT - FRONT  .
  3. Install the front seat cushion cover to the front seat cushion. Refer to SEAT CUSHION COVER REPLACEMENT - FRONT  .
  4. Install the front seat adjuster. Refer to SEAT ADJUSTER REPLACEMENT - FRONT  .
  5. Install the front seat. Refer to SEAT BACK REPLACEMENT - FRONT  .
  6. Install the front bucket seat to the vehicle. Refer to SEAT REPLACEMENT - BUCKET  .
    Fig 1: Connecting All Required Wiring Harnesses To Front Seat Cushion Frame
    G01518033Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.