Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998SUBURBAN K2500, 7.4 J, PART TIMEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 4 (ENGINE CONTROLS - SERVICE & ADJUSTMENT SYSTEM SPECIFICATIONS - 4.3L)CAPACITIES
1998 Chevrolet Suburban K2500, 7.4 J, Part Time
Section 4 (Engine Controls - Service & Adjustment System Specifications - 4.3L): Capacities
1998 Chevrolet Suburban K2500, 7.4 J, Part TimeSECTION Capacities
WARNING: This page is about a different car, the 1997 GMC Savana, 1997 Chevrolet Chevy Van, and 1997 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
BATTERY SPECIFICATIONS
| Cold Crank Amps @ 0°F (-18°C) | Reserve Capacity (Minutes) |
|---|---|
| 500 | 125 |
| 550 | 130 |
| 600 | 115 |
| 690 | 115 |
| 750 | 160 |
| 1075 | 200 |
FLUID CAPACITIES
| Application | (1) Quantity - Qts. (L) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Crankcase | (2) 4.5 (4.3) | |||||||||||
| Cooling System (Includes Heater) | ||||||||||||
| With A/C | 18.0 (17.0) | |||||||||||
| Without A/C | 17.5 (16.6) | |||||||||||
| Automatic Transmission (Dexron-III) (3) 4L60-E | 5.0 (4.7) | |||||||||||
| Manual Transmission | ||||||||||||
| NVG 3500 | (4) 2.2 (2.0) | |||||||||||
| NVG 4500 | (5) 4.0 (3.8) | |||||||||||
|
||||||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.