Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET1998SUBURBAN K2500, 7.4 J, PART TIMEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 154 (ENGINE CONTROL SYSTEM SELF-DIAGNOSTICS - 3.4L)DIAGNOSTIC TESTSDTC P0121: THROTTLE POSITION SENSOR PERFORMANCECONDITIONS FOR RUNNING DTC
1998 Chevrolet Suburban K2500, 7.4 J, Part Time
Conditions For Running DTC
1998 Chevrolet Suburban K2500, 7.4 J, Part TimeSECTION Conditions For Running DTC
WARNING: This page is about a different car, the 2002 Pontiac Grand Am, 2002 Oldsmobile Alero, 2002 Chevrolet Monte Carlo, and 2002 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- DTCs P0107, P0108, P0122, P0123, P1106, P1107, P1121, or P1122 are not set.
- The engine has been running for more than 2 minutes.
- The Engine Coolant Temperature (ECT) is more than 167Β°F (75Β°C).
- The MAP reading is less than 50 kPa for a TP sensor skewed high test.
- The MAP reading is more than 70 kPa for a TP sensor skewed low test.
- The MAP is steady for 5 seconds or more.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.