Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1998S10 PICKUP 2D PICKUP, 2.2 4, AUTOMATICREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
1998 Chevrolet S10 Pickup 2D Pickup, 2.2 4, Automatic
Quick Lookups: Fluids
1998 Chevrolet S10 Pickup 2D Pickup, 2.2 4, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 2.2L Eng | 9.00 OZS. | 0.26 L | PAG 46 | S | ||
| Air Cond Refrigerant | 1.88 LBS. | 0.85 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill | 5.00 QTS. | 4.73 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S | |
| Automatic Transmission Fluid | Overhaul | 11.00 QTS. | 10.4 L | Automatic Transmission Fluid DEXRON VI | Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Front | 2.60 PTS. | 1.23 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Differential Gear Oil | Rear | 4.00 PTS. | 1.89 L | API - GL-5, SAE 80W-90 Gear Oil | S | ||
| Engine Coolant | 2.2L Eng | 11.50 QTS. | 10.88 L | 50/50 mixture of DEX-COOL and clean water (preferably distilled) | S | ||
| Engine Oil | w/Filter | 4.50 QTS. | 4.25 L | API - SAE 5W-30 | S | ||
| Fuel Tank | 18.50 GALS. | 70.03 L | S | ||||
| Manual Transmission Fluid | In-Line4 | 2.29 QTS. | 2.16 L | Manual Transmission Fluid with 5% Friction Modifier | S | ||
| Power Steering Fluid | N/A | N/A | GM Power Steering Fluid | GM Part No. 1050017. | S | ||
| Transfer Case Fluid | 1.25 QTS. | 1.18 L | Manual Transmission Fluid | S | |||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.