Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1997CHEVY VAN G2500, VAN CARGO EXTENDED, 6.5 FREPAIR AND DIAGNOSIS (SINGLE PAGE)STEERINGSTEERING COLUMN (G SERIES)REMOVAL & INSTALLATIONTURN SIGNAL & MULTIFUNCTION SWITCHREMOVAL
1997 Chevrolet Chevy Van G2500, Van Cargo Extended, 6.5 F
Turn Signal & MULTIFUNCTION Switch: Removal
1997 Chevrolet Chevy Van G2500, Van Cargo Extended, 6.5 FSECTION Removal
- Ensure lever is in center of OFF position. Disconnect negative battery cable. Disable air bag system (if equipped). See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove steering wheel. See STEERING WHEEL & HORN PAD . Remove knee bolster, if necessary.
- Remove bolts/screws and lower column cover. Remove bolts/screws and upper column cover. Remove lock cylinder, if necessary. See LOCK CYLINDER (FUNCTIONAL) . Remove harness strap. Disconnect steering column electrical connector. Disconnect turn signal and multifunction switch Gray and Black connectors. Remove turn signal and multifunction switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.