Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1997CHEVY VAN G2500, VAN CARGO EXTENDED, 6.5 FREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEWINDOWSPOWER WINDOW SYSTEMTESTINGRIGHT WINDOW DOES NOT OPERATE FROM EITHER SWITCH
1997 Chevrolet Chevy Van G2500, Van Cargo Extended, 6.5 F
Right Window Does Not Operate From Either Switch
1997 Chevrolet Chevy Van G2500, Van Cargo Extended, 6.5 FSECTION Right Window Does Not Operate From Either Switch
- Disconnect left and right window switch connectors. Connect self-powered test light between Light Blue wire terminals at left and right window switch connectors. If test light illuminates, go to next step. If test light does not illuminate, repair open in Light Blue wire between left and right window switch.
- Connect self-powered test light between Tan wire terminals at left and right window switch connectors. If test light illuminates, go to next step. If test light does not illuminate, repair open in Tan wire between left and right window switch.
- Disconnect right window motor connector. Connect self-powered test light between Brown wire terminals at right window switch connector and motor connector. If test light illuminates, go to next step. If test light does not illuminate, repair open in Brown wire between right window switch and right window motor.
- Connect self-powered test light between Dark Blue wire terminals at right window switch connector and motor connector. If test light illuminates and no mechanical problems exist, replace right window motor. If test light does not illuminate, repair open in Dark Blue wire between right window switch and right window motor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.