Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1997CHEVY VAN G2500, VAN CARGO EXTENDED, 6.5 FREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEWINDOWSPOWER WINDOW SYSTEMTESTINGBOTH WINDOWS DO NOT OPERATE
1997 Chevrolet Chevy Van G2500, Van Cargo Extended, 6.5 F
Both Windows Do Not Operate
1997 Chevrolet Chevy Van G2500, Van Cargo Extended, 6.5 FSECTION Both Windows Do Not Operate
- Disconnect left window switch connector. Connect self-powered test light between ground and Black wire at left window switch connector. If test light illuminates, go to next step. If test light does not illuminate, repair open in Black wire between left window switch and ground connection.
- Turn ignition switch to ACC position. Connect test light between ground and Yellow wire at left window switch connector. If test light does not illuminate, repair open in Yellow wire between left window switch and instrument panel fuse block. If test light illuminates, replace left window switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.