Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory Seat And Mirrors
Each RKE transmitter can be programmed to allow activation of memory seat and mirrors to memory position No. 1, memory position No. 2, exit mode or disable memory feature. Each RKE transmitter may be programmed for separate functions. Perform the following steps to program memory seat and mirror positions for each transmitter.
- Adjust seat and mirrors to desired positions.
- Press SET MEMORY button on memory seat and mirror controls, (verified by a single beep).
- Press desired position (No. 1, No. 2 or exit), within 5 seconds, (verified by a single beep).
- Press UNLOCK button on RKE transmitter within 5 seconds, (verified by 2 beeps). To disable memory seat and mirror mode, repeat procedure skipping step 3). Repeat steps for each RKE transmitter.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.