SYS.OK|MANUAL.DB● LIVE
1996 Chevrolet Suburban K1500, 5.7 R

Quick Lookups: Fluids

1996 Chevrolet Suburban K1500, 5.7 RSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/Denso Compressor,w/o Rear AC 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil w/OE Harrison Compressor,w/o Rear AC 8.00 OZS. 0.23 L PAG 150 S
Air Cond Compressor Oil w/OE Harrison Compressor,w/Rear A/C 11.00 OZS. 0.32 L PAG 150 S
Air Cond Compressor Oil w/Rear A/C,w/Denso Compressor 11.00 OZS. 0.32 L PAG 46 S
Air Cond Refrigerant w/o Rear Unit 2.25 LBS. 1.02 KG R-134a S
Air Cond Refrigerant w/Rear Unit 4.00 LBS. 1.81 KG R-134a S
Automatic Transmission Fluid Trans Mfr CD 4L60E/M30 Drain and Refill 5.00 QTS. 4.73 L Automatic Transmission Fluid DEXRON IIE S
Automatic Transmission Fluid Trans Mfr CD 4L60E/M30 Overhaul 11.50 QTS. 10.88 L Automatic Transmission Fluid DEXRON IIE S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil 8 1/2",8 5/8" 2.10 QTS. 1.98 L API - GL-5, SAE 80W-90 S
Differential Gear Oil 9 1/2",9 3/4" 2.70 QTS. 2.55 L API - GL-5, SAE 80W-90 S
Differential Gear Oil K1500,K2500 1.75 QTS. 1.65 L API - GL-5, SAE 80W-90 S
Differential Gear Oil K1500,K2500 8 1/4" Axle 2.25 QTS. 2.12 L API - GL-5, SAE 80W-90 S
Engine Coolant 5.7L Eng w/Air Cond 20.00 QTS. 18.92 L 50/50 mixture of DEX-COOL and clean water (preferably distilled) S
Engine Coolant 5.7L Eng w/o Air Cond 17.50 QTS. 16.56 L 50/50 mixture of DEX-COOL and clean water (preferably distilled) S
Engine Oil 5.7L Eng w/Filter 5.00 QTS. 4.73 L API - SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 0Deg.F) S
Engine Oil 5.7L Eng w/o Filter 4.00 QTS. 3.78 L API - SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 0Deg.F) S
Fuel Tank 42.00 GALS. 158.98 L S
Power Steering Fluid 1.00 QTS. 0.94 L GM Power Steering Fluid S
Transfer Case Fluid 2.25 QTS. 2.12 L Automatic Transmission Fluid DEXRON III S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.