Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1996PICKUP C2500, 2D PICKUP, 6.5 F, AUTOMATICREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROLS - TESTS W/CODES - GASOLINEDIAGNOSTIC TROUBLE CODE TESTSDTC P0500 - VEHICLE SPEED SENSOR CIRCUITDTC WILL TEST WHEN THE FOLLOWING CONDITIONS ARE PRESENT
1996 Chevrolet Pickup C2500, 2D Pickup, 6.5 F, Automatic
DTC will test when the following conditions are present
1996 Chevrolet Pickup C2500, 2D Pickup, 6.5 F, AutomaticSECTION DTC will test when the following conditions are present
- No MAP sensor DTCs are set.
- Vehicle speed is less than one MPH.
- Throttle angle is less than 3 percent.
- Engine coolant temperature is greater than 140°F (60°C).
- Engine speed is 1400-4400 RPM.
- Manifold absolute pressure is less than 20 kPa.
- All conditions are met for 5 seconds.
- No MAP sensor DTCs are set.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.