SYS.OK|MANUAL.DB● LIVE
1995 Chevrolet Pickup C2500, 2D Pickup, 4.3 Z, Automatic

Quick Lookups: Fluids

1995 Chevrolet Pickup C2500, 2D Pickup, 4.3 Z, AutomaticSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 8.00 OZS. 0.23 L PAG 150 S
Air Cond Refrigerant 2 Door 2.00 LBS. 0.9 KG R-134a S
Automatic Transmission Fluid Trans Mfr CD 4L60E/M30 Drain and Refill 5.00 QTS. 4.73 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Automatic Transmission Fluid Trans Mfr CD 4L60E/M30 Total Capacity 11.00 QTS. 10.4 L Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Chev. 10 1/2" ring gear 3.60 QTS. 3.4 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Chev. 8 1/2" ring gear 2.10 QTS. 1.98 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Chev. 9 1/2" ring gear 2.75 QTS. 2.6 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Dana 10 1/2" ring gear 2.75 QTS. 2.6 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Dana 11" ring gear 4.10 QTS. 3.88 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Dana 9 3/4 ring gear 2.75 QTS. 2.6 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rockwell 12" ring gear 7.00 QTS. 6.62 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Engine Coolant 4.3L Eng 11.00 QTS. 10.4 L 50/50 mixture of DEX-COOL and clean water (preferably distilled) S
Engine Oil 4.3L Eng w/Filter 4.50 QTS. 4.25 L API - SAE 10W-30 S
Engine Oil 4.3L Eng w/o Filter 4.00 QTS. 3.78 L API - SAE 10W-30 S
Fuel Tank 8 FT. Bed Len 34.00 GALS. 128.7 L S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.