Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Note On Intermittent
Intermittent Code P039 nay be caused by delayed TCC engagement (usually first apply after a cold start) or by TCC slippage during high engine load conditions. Delayed TCC engaged can be checked using PCM output override PS01 (TCC solenoid) to engage and disengage and time how long it takes TCC to engage by watching PCM data PD73. Delays of greater than 5 seconds may cause code to set.
TCC slippage during high load conditions can be determined by looking at Code P039 snapshot data. High throttle angle (PD01), MAP (PD02) may indicate a high load condition. Duplicating high load conditions may cause the code to set.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.