Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1995CAVALIER LS, 4D SEDAN, 2.2 4REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 15 (ENGINE CONTROLS - TESTS W/CODES - 2.4L)SPECIFICATIONS
1995 Chevrolet Cavalier LS, 4D Sedan, 2.2 4
Section 15 (Engine Controls - Tests W/Codes - 2.4L): Specifications
1995 Chevrolet Cavalier LS, 4D Sedan, 2.2 4SECTION Specifications
WARNING: This page is about a different car, the 1996 Pontiac Sunfire and 1996 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
MAP SENSOR VOLTAGE (1)
| Altitude | Voltage Range | ||
|---|---|---|---|
| Less Than 1000 | 3.8-5.5 | ||
| 1000-2000 | 3.6-5.3 | ||
| 2000-3000 | 3.5-5.1 | ||
| 3000-4000 | 3.3-5.0 | ||
| 4000-5000 | 3.2-4.8 | ||
| 5000-6000 | 3.0-4.6 | ||
| 6000-7000 | 2.9-4.5 | ||
| 7000-8000 | 2.8-4.3 | ||
| 8000-9000 | 2.6-4.2 | ||
| 9000-10,000 | 2.5-4.0 | ||
|
|||
IAT TEMPERATURE-TO-RESISTANCE VALUES
| Temperature °F (°C) | Ohms |
|---|---|
| 212 (100) | 177 |
| 194 (90) | 241 |
| 158 (70) | 467 |
| 122 (50) | 973 |
| 104 (40) | 1459 |
| 86 (30) | 2238 |
| 68 (20) | 3520 |
| 50 (10) | 5670 |
ECT TEMPERATURE-TO-RESISTANCE VALUES
| Temperature °F (°C) | Ohms |
|---|---|
| 212 (100) | 177 |
| 194 (90) | 241 |
| 158 (70) | 467 |
| 122 (50) | 973 |
| 104 (40) | 1459 |
| 86 (30) | 2238 |
| 68 (20) | 3520 |
| 50 (10) | 5670 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.