AWD Models

1995 Chevrolet Astro Van Cargo, RWDSECTION AWD Models
WHEEL ALIGNMENT SPECIFICATIONS (AWD MODELS)

Application Preferred Range
Camber (Degrees) Front 0.89 0.49 to 1.29
Camber (Degrees) Rear N/A N/A
Caster (Degrees) Front 2.0 1.5 to 2.5
Caster (Degrees) Rear N/A N/A
Toe-In (Millimeters) Front 2.5 1.5 to 4
Toe-In (Millimeters) Rear N/A N/A
Toe-In (Degrees) Front 0.2 0.1 to 0.3
Toe-In (Degrees) Rear N/A N/A
Toe-In (Inches) Front -0.05 -0.1 to 0
Toe-In (Inches) Rear N/A N/A
Toe-In (mm) Front -1.5 -2.5 to 0
Toe-In (mm) Rear N/A N/A
Wheelbase: Inches 111 N/A
Wheelbase: Millimeters 2819 N/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.