SYS.OK|MANUAL.DB● LIVE
1994 Chevrolet Astro Van Cargo, 4.3 W, RWD

Quick Lookups: Fluids

1994 Chevrolet Astro Van Cargo, 4.3 W, RWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/Denso Compressor,w/o Rear AC 8.00 OZS. 0.23 L PAG 46 S
Air Cond Compressor Oil w/Denso Compressor,w/Rear A/C 11.00 OZS. 0.32 L PAG 46 S
Air Cond Compressor Oil w/OE Harrison Compressor,w/o Rear AC 8.00 OZS. 0.23 L PAG 150 S
Air Cond Compressor Oil w/OE Harrison Compressor,w/Rear A/C 11.00 OZS. 0.32 L PAG 150 S
Air Cond Refrigerant Front & Rear 3.00 LBS. 1.36 KG R-134a S
Air Cond Refrigerant Front 2.00 LBS. 0.9 KG R-134a S
Automatic Transmission Fluid Overhaul 10.50 QTS. 9.93 L Automatic Transmission Fluid DEXRON IIE Total quantity required may be higher, dependent upon fluid cooler size and length and diameter of fluid lines. S
Automatic Transmission Fluid Pan Removal and Replacement 5.00 QTS. 4.73 L Automatic Transmission Fluid DEXRON IIE S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Front & Rear,Standard 2.00 QTS. 1.89 L API - GL-5, SAE 80W-90 Gear Oil GM Part No. 1052271. S
Differential Gear Oil Locking Differential 2.00 QTS. 1.89 L API - GL-5, SAE 80W-90 Gear Oil GM Part No. 1052271. S
Engine Coolant w/o Rear Heater 13.50 QTS. 12.77 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant w/Rear Heater 16.50 QTS. 15.61 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Oil w/Filter 5.00 QTS. 4.73 L API - SAE 5W-30 (Below -20Deg.F to Above 100Deg.F), 10W-30 (Above 0Deg.F to Above 100Deg.F) S
Engine Oil w/o Filter 4.00 QTS. 3.78 L API - SAE 5W-30 (Below -20Deg.F to Above 100Deg.F), 10W-30 (Above 0Deg.F to Above 100Deg.F) S
Fuel Tank 27.00 GALS. 102.2 L S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Transfer Case Fluid 1.50 QTS. 1.41 L Automatic Transmission Fluid DEXRON IIE S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.