Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1993RV CUTAWAY 5.7 KREPAIR AND DIAGNOSIS (SINGLE PAGE)STEERINGMANUAL STEERINGSTEERING SYSTEM - POWER RECIRCULATING BALLREMOVAL & INSTALLATIONPITMAN ARMREMOVAL (ALL OTHER MODELS)
1993 Chevrolet RV Cutaway 5.7 K
Removal (All Other Models)
1993 Chevrolet RV Cutaway 5.7 KSECTION Removal (All Other Models)
- Raise and support vehicle. Remove pitman arm nut from relay rod (if equipped). Using Steering Linkage Puller (J-24319-01), remove pitman arm from relay rod (if equipped). Remove pitman arm nut from connecting rod (if equipped). Using Steering Linkage Puller (J-24319-01), remove pitman arm from connecting rod (if equipped).
- Mark relationship of pitman arm-to-pitman shaft position. Remove pitman arm nut and spring washer from pitman shaft. Using Remover (J-6632-01) or Puller (J-29107), remove pitman arm from pitman shaft. See Figure -Figure .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.