Damper Door - Wax Pellet Check (Except 2.8L)

1993 Chevrolet RV Cutaway 5.7 KSECTION Damper Door - Wax Pellet Check (Except 2.8L)
  1. Remove air cleaner assembly from vehicle and allow to cool to less than 40Β°F (4Β°C). Damper door should be closed to outside (cold) air.
  2. Reinstall air cleaner assembly. Start engine and observe damper door. As air cleaner assembly warms up, wax pellet should expand, closing off hot air delivery and opening cold air delivery.
  3. If door does not respond as indicated, ensure door is not binding and calibrated damper spring is installed properly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.