Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET1993RV CUTAWAY 5.7 KREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICAL5.7L V8 - VIN [K]ENGINE SPECIFICATIONSGENERAL ENGINE SPECIFICATIONS

1993 Chevrolet RV Cutaway 5.7 K

General Engine Specifications

1993 Chevrolet RV Cutaway 5.7 KSECTION General Engine Specifications

GENERAL ENGINE SPECIFICATIONS

Application

Specification

Displacement

350 Cu. In. (5.7L)

Fuel System

TBI

Bore

4.00" (101.6 mm)

Stroke

3.48" (88.4 mm)

Compression Ratio

⁽¹⁾ 9.3:1

Horsepower @ RPM

⁽¹⁾⁽²⁾ 210 @ 4000

Torque Ft. Lbs. @ RPM

⁽¹⁾⁽²⁾ 300 @ 2800

⁽¹⁾	On vehicles with GVW more than 8500 lbs., some specifications are different. Compression ratio is 8.6:1, horsepower is 190 @ 4000 RPM, and torque is 300 ft. lbs. @ 2400 RPM.

⁽²⁾	On Sportvan, horsepower is 195 @ 4000 RPM, and torque is 290 ft. lbs. @ 2400 RPM.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.