Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1993CAVALIER Z24, 2D COUPE, AUTOMATICREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
1993 Chevrolet Cavalier Z24, 2D Coupe, Automatic
Quick Lookups: Fluids
1993 Chevrolet Cavalier Z24, 2D Coupe, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | 2.25 LBS. | 1.02 KG | R-12 | S | |||
| Automatic Transmission Fluid | Overhaul | 6.90 QTS. | 6.52 L | Automatic Transmission Fluid DEXRON IIE | S | ||
| Automatic Transmission Fluid | Pan Removal and Replacement | 4.00 QTS. | 3.78 L | Automatic Transmission Fluid DEXRON IIE | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 3.1L Eng | 14.20 QTS. | 13.43 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | GM Specification 1825-M. | S | |
| Engine Oil | w/Filter | 5.00 QTS. | 4.73 L | SAE 5W-30 (Preferred) (Below 0Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | Use oil that has been certified by the American Petroleum Institute. | S | |
| Engine Oil | w/o Filter | 4.00 QTS. | 3.78 L | SAE 5W-30 (Preferred) (Below 0Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | Use oil that has been certified by the American Petroleum Institute. | S | |
| Fuel Tank | 15.20 GALS. | 57.53 L | S | ||||
| Manual Transmission Fluid | Drain and Refill | 2.00 QTS. | 1.89 L | Synchromesh Transmission Fluid | S | ||
| Power Steering Fluid | Complete System | 2.25 PTS. | 1.06 L | GM Hydraulic Power Steering Fluid | S | ||
| Power Steering Fluid | Pump Only | 1.00 PTS. | 0.47 L | GM Hydraulic Power Steering Fluid | S | ||
| Windshield Washer Fluid | N/A | N/A | Optikleen Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.