Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1993CAMARO Z28, STANDARD, M29REPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURESALIGNMENT SPECIFICATIONS
1993 Chevrolet Camaro Z28, Standard, M29
Alignment Specifications
1993 Chevrolet Camaro Z28, Standard, M29SECTION Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range |
|---|---|---|
| Camber (Degrees) Front | 0.4 | -0.1 to 0.9 |
| Camber (Degrees) Rear | 0 | -0.6 to 0.6 |
| Caster (Degrees) Front | 4.4 | 3.9 to 4.9 |
| Caster (Degrees) Rear | N/A | N/A |
| Toe-In (Inches) Front | 0 | -0.1 to 0.1 |
| Toe-In (Inches) Rear | 0 | -0.15 to 0.15 |
| Toe-In (Millimeters) Front | 0 | -2.5 to 2.5 |
| Toe-In (Millimeters) Rear | 0 | -4 to 4 |
| Toe-In (Degrees) Front | 0 | -0.2 to 0.2 |
| Toe-In (Degrees) Rear | 0 | -0.3 to 0.3 |
| Wheelbase (Inches) | 101 1/8 | N/A |
| Wheelbase (Millimeters) | 2568 | N/A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.