Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1990LUMINA APV V6-191 3.1LREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSCUSTOMER INTERESTINSTRUMENT PANEL - UPPER SURFACE REFLECTION
1990 Chevrolet Lumina APV V6-191 3.1L
Instrument Panel - Upper Surface Reflection
1990 Chevrolet Lumina APV V6-191 3.1LSECTION Instrument Panel - Upper Surface Reflection
File In Section: 08 - Body and Accessories
Bulletin No.: 99-08-49-006
Date: April, 1999
INFORMATION
Subject:
Cleaning of Upper Instrument Panel Surfaces
Models:
1999 and Prior Passenger Cars and Light Duty Trucks
Comments on a reflection of the upper instrument panel pad into the windshield, when driving in direct sunlight, may be received. This condition, sometimes referred to as a "veiling reflection", may be aggravated by the use of wax or silicone based products when cleaning the surface.
Advise customers, technicians and new car prep or make ready personnel, that products containing wax or silicone should not be used to clean the top instrument panel pad. A warm water and mild soap solution such as saddle soap, oil soap or an equivalent, should be used whenever the top instrument panel pad needs cleaning.
If a customer requests that a protectant type product be applied, ONLY USE THOSE THAT LEAVE A FLAT OR SATIN FINISH. Do NOT apply products that leave a glossy finish or those that Increase the shine level above the original production level.
Bulletin No.: 99-08-49-006
Date: April, 1999
INFORMATION
Subject:
Cleaning of Upper Instrument Panel Surfaces
Models:
1999 and Prior Passenger Cars and Light Duty Trucks
Comments on a reflection of the upper instrument panel pad into the windshield, when driving in direct sunlight, may be received. This condition, sometimes referred to as a "veiling reflection", may be aggravated by the use of wax or silicone based products when cleaning the surface.
Advise customers, technicians and new car prep or make ready personnel, that products containing wax or silicone should not be used to clean the top instrument panel pad. A warm water and mild soap solution such as saddle soap, oil soap or an equivalent, should be used whenever the top instrument panel pad needs cleaning.
If a customer requests that a protectant type product be applied, ONLY USE THOSE THAT LEAVE A FLAT OR SATIN FINISH. Do NOT apply products that leave a glossy finish or those that Increase the shine level above the original production level.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.