Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1990LUMINA APV V6-191 3.1LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLDRUM BRAKE SYSTEMBACKING PLATETESTING AND INSPECTION
1990 Chevrolet Lumina APV V6-191 3.1L
Backing Plate: Testing and Inspection
1990 Chevrolet Lumina APV V6-191 3.1LSECTION Testing and Inspection
Inspect backing plate shoe contact surface for grooves that may restrict shoe movement and cannot be removed by lightly sanding with emery cloth or other suitable abrasive. If backing plate exhibits above condition, it should be replaced. Also inspect for signs of cracks, warpage and excessive rust, indicating need for replacement.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.