Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1990CAPRICE BROUGHAM LS, 5.0 EREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROLS - SYSTEM/COMPONENT TESTSTHERMOSTATIC AIR CLEANERTEMPERATURE SENSOR
1990 Chevrolet Caprice Brougham LS, 5.0 E
Temperature Sensor
1990 Chevrolet Caprice Brougham LS, 5.0 ESECTION Temperature Sensor
- Air cleaner temperature should be less than 86°F (30°C). Place thermometer as close to sensor inside air cleaner. Start and idle engine. Damper door should close off outside air immediately.
- When damper door starts to open snorkel passage, remove air cleaner cover and read thermometer temperature. Thermometer should read 131°F (55°C).
- If damper door does not open to outside air at the specified temperature, replace defective thermostatic air cleaner temperature sensor.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.