Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1990BLAZER FULL SIZE V8-379 6.2L DSLREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINDIFFERENTIAL ASSEMBLYPINION FLANGESPECIFICATIONS
1990 Chevrolet Blazer Full Size V8-379 6.2L DSL
Pinion Flange: Specifications
1990 Chevrolet Blazer Full Size V8-379 6.2L DSLSECTION Specifications
Front Axle Pinion Nut 0.35 N.m (3 in. lbs.)* greater than original torque.
* Tighten the pinion nut by small increments until the torque required to rotate pinion is achieved.
* Tighten the pinion nut by small increments until the torque required to rotate pinion is achieved.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.