Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1988BERETTA 2.8 W, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURESALIGNMENT SPECIFICATIONSFRONT
1988 Chevrolet Beretta 2.8 W, Standard
Alignment Specifications: Front
1988 Chevrolet Beretta 2.8 W, StandardSECTION Front
WHEEL ALIGNMENT SPECIFICATIONS (FRONT)
| Application | Specification | |||
|---|---|---|---|---|
| Camber in Degrees | ||||
| Fraction | 51/64 +/- 32/64 | |||
| Decimal | 0.8 +/- 0.5 | |||
| Caster in Degrees | ||||
| Fraction | 1 45/64 +/- 1 | |||
| Decimal | 1.7 +/- 1 | |||
| Toe-In in Inches | ||||
| Fraction | 0 +/- 3/64 | |||
| Decimal | 0 +/- 0.047 | |||
| Toe-In in Degrees | ||||
| Fraction | 0 +/- 3/32 | |||
| Decimal | 0 +/- 0.094 | |||
| Toe-Out on Turns | ||||
| Inner | (1) | |||
| Outer | (1) | |||
| Steering Axis Inclination (SAI) | (1) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.