SYS.OK|MANUAL.DB● LIVE
1987 Chevrolet Pickup V20, 2D Pickup, 5.0 H, Standard

Quick Lookups: Fluids

1987 Chevrolet Pickup V20, 2D Pickup, 5.0 H, StandardSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 3.25 LBS. 1.47 KG R-12 S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Rear,12 1/4" Ring Gear 26.80 PTS. 12.68 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,8 7/8" Ring Gear 3.50 PTS. 1.65 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,8.5" Ring Gear 4.25 PTS. 2.01 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,9.75" axle 6.00 PTS. 2.83 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,Chev. 10 1/2" ring gear 6.50 PTS. 3.07 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil Rear,Dana 10 1/2" ring gear 7.20 PTS. 3.4 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Differential Gear Oil V10,V20 Front 2.00 QTS. 1.89 L API - GL-5, SAE 80W or 80W-90 Gear Oil S
Engine Coolant Eng VIN H w/Air Cond 18.00 QTS. 17.03 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant Eng VIN H w/o Air Cond 17.50 QTS. 16.56 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Oil Eng VIN H w/Filter 5.00 QTS. 4.73 L SAE 10W-30 S
Engine Oil Eng VIN H w/o Filter 4.00 QTS. 3.78 L SAE 10W-30 S
Fuel Tank Gas,8 FT. Bed Len Dual 16.00 GALS. 60.56 L Above 8600 GVWR - Both tanks 20 gal. S
Fuel Tank Gas,8 FT. Bed Len Single 20.00 GALS. 75.7 L S
Manual Transmission Fluid 4 Spd Trans 4.00 QTS. 3.78 L Automatic Transmission Fluid DEXRON II S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Transfer Case Fluid V10,V20 5.20 QTS. 4.92 L Automatic Transmission Fluid DEXRON III S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.