SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987PICKUP V10, 4.3 Z, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALSTARTERSTARTER - DELCO-REMYSPECIFICATIONS
1987 Chevrolet Pickup V10, 4.3 Z, Automatic

Starter - DELCO-REMY: Specifications

1987 Chevrolet Pickup V10, 4.3 Z, AutomaticSECTION Specifications
STARTER NO-LOAD SPECIFICATIONS(1)

Part No. Series Amps. RPM
1998530 5MT 50-75 6000-11,900
1998524 5MT 50-75 6000-11,900
1998532 5MT 50-75 6000-11,900
1998559 10MT 60-90 6500-10,500
1998560 10MT 70-110 6500-10,700
1998561 10MT 70-110 6500-10,700
1998562 10MT 70-110 6500-10,700
1998565 10MT 70-110 6500-10,700
1998574 10MT 70-110 6500-11,700
1998583 10MT 70-110 6500-10,700
1998584 10MT 70-110 6500-10,700
1998588 10MT 70-110 6500-10,700
1998589 10MT 70-110 6500-10,700
1113589 27MT 120-210 9000-13,400
1113590 27MT 120-210 9000-13,400
(1) Starter requires 10-volts for testing GM models, 9 volts for other model.
PINION CLEARANCE SPECIFICATIONS

Application In. (mm)
Pinion-to-Housing (1).010-.140 (.25-3.56)
Pinion-to-Flywheel Clearance .020 (.6)
(1) Measured between pinion stop (retainer) with pinion in engaged position.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.