Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987HI-CUBE 6.2 J, 475/M40REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 35 (A/C-HEATER SYSTEM - MANUAL)ADJUSTMENTSTEMPERATURE CONTROL CABLECHEVETTE & 1000
1987 Chevrolet Hi-Cube 6.2 J, 475/M40
Chevette & 1000
1987 Chevrolet Hi-Cube 6.2 J, 475/M40SECTION Chevette & 1000
WARNING: This page does not describe the selected car, but rather 38 other vehicles, including the 1987 Pontiac Sunbird, 1987 Pontiac Safari, 1987 Pontiac Grand Prix, 1987 Pontiac Grand Am, and 1987 Pontiac Firebird. However, it is still accessible from the selected car via links, so may be relevant.
- Move control lever to maximum "COLD" position. Adjust turnbuckle until control lever moves 1" (25 mm) back from end of slot.
- Move control lever to maximum "HEAT" position, then back to maximum "COLD" position. If lever does not spring back, or springs back more than 1" (25 mm), repeat adjustment.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.