Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987HI-CUBE 6.2 J, 475/M40REPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICAL5.0L (305") V8 - VIN [H]ENGINE SPECIFICATIONSVALVE SPECIFICATIONS
1987 Chevrolet Hi-Cube 6.2 J, 475/M40
Valve Specifications
1987 Chevrolet Hi-Cube 6.2 J, 475/M40SECTION Valve Specifications
VALVE SPECIFICATIONS
| Application | Specifications | |||
|---|---|---|---|---|
| Intake | ||||
| Head Diameter | (1) | |||
| Face Angle | 45° | |||
| Seat Angle | 46° | |||
| Seat Width | .031-.063" (.79-1.60 mm) | |||
| Stem Diameter | .0010-.0027" (.025-.069 mm) | |||
| Stem Clearance | (1) | |||
| Valve Lift | (1) | |||
| Exhaust | ||||
| Head Diameter | (1) | |||
| Face Angle | 45° | |||
| Seat Angle | 46° | |||
| Seat Width | .063-.094" (1.60-2.39 mm) | |||
| Stem Diameter | (1) | |||
| Stem Clearance | .0010-.0027" (.025-.069 mm) | |||
| Valve Lift | (1) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.