Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET1987HI-CUBE 6.2 J, 400/M40REPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONMANUAL TRANSOVERHAUL - NEW PROCESS A833 4-SPEED ODSERVICE (IN VEHICLE)SPEEDOMETER PINION GEARREMOVAL

1987 Chevrolet Hi-Cube 6.2 J, 400/M40

Speedometer Pinion Gear: Removal

1987 Chevrolet Hi-Cube 6.2 J, 400/M40SECTION Removal

Place drain pan under speedometer adapter. Remove bolt and retainer securing pinion adapter to extension housing. With cable housing connected, work adapter and pinion out of extension housing.

Fig 1: Exploded View of Chrysler Motors Speedometer Pinion & Adapter Assembly

Courtesy of CHRYSLER MOTORS.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.