Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987HI-CUBE 6.2 J, 400/M40REPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURESALIGNMENT SPECIFICATIONS
1987 Chevrolet Hi-Cube 6.2 J, 400/M40
Alignment Specifications
1987 Chevrolet Hi-Cube 6.2 J, 400/M40SECTION Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| G10/20 | |||
| Axle Gap (1 1/2 Inches) | |||
| Caster (Degrees) | 3.4 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (1 3/4 Inches) | |||
| Caster (Degrees) | 3.2 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 Inches) | |||
| Caster (Degrees) | 3.0 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/4 Inches) | |||
| Caster (Degrees) | 2.9 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/2 Inches) | |||
| Caster (Degrees) | 2.7 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 3/4 Inches) | |||
| Caster (Degrees) | 2.5 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 Inches) | |||
| Caster (Degrees) | 2.3 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/4 Inches) | |||
| Caster (Degrees) | 2.2 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/2 Inches) | |||
| Caster (Degrees) | 2.0 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 3/4 Inches) | |||
| Caster (Degrees) | 1.8 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 Inches) | |||
| Caster (Degrees) | 1.7 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/4 Inches) | |||
| Caster (Degrees) | 1.5 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/2 Inches) | |||
| Caster (Degrees) | 1.4 | ||
| Camber (Degrees) | .05 | ||
| Toe-in (Inches) | 3/16 in | ||
| G30 | |||
| Axle Gap (1 1/2 Inches) | |||
| Caster (Degrees) | 3.1 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (1 3/4 Inches) | |||
| Caster (Degrees) | 3.0 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 Inches) | |||
| Caster (Degrees) | 2.7 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/4 Inches) | |||
| Caster (Degrees) | 2.4 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/2 Inches) | |||
| Caster (Degrees) | 2.1 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 3/4 Inches) | |||
| Caster (Degrees) | 1.8 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 Inches) | |||
| Caster (Degrees) | 1.5 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/4 Inches) | |||
| Caster (Degrees) | 1.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/2 Inches) | |||
| Caster (Degrees) | 0.9 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 3/4 Inches) | |||
| Caster (Degrees) | 0.7 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 Inches) | |||
| Caster (Degrees) | 0.5 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/4 Inches) | |||
| Caster (Degrees) | 0.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/2 Inches) | |||
| Caster (Degrees) | -.03 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| P20/30 (W/out Dual Wheels, I-Beam Suspension Or Hydraulic Drum Or Disc Brakes) | |||
| Axle Gap (2 Inches) | |||
| Caster (Degrees) | 3.0 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/4 Inches) | |||
| Caster (Degrees) | 2.6 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/2 Inches) | |||
| Caster (Degrees) | 2.3 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 3/4 Inches) | |||
| Caster (Degrees) | 2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 Inches) | |||
| Caster (Degrees) | 1.7 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/4 Inches) | |||
| Caster (Degrees) | 1.4 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/2 Inches) | |||
| Caster (Degrees) | 1.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 3/4 Inches) | |||
| Caster (Degrees) | 0.9 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 Inches) | |||
| Caster (Degrees) | 0.6 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/4 Inches) | |||
| Caster (Degrees) | 0.4 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/2 Inches) | |||
| Caster (Degrees) | 0.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 3/4 Inches) | |||
| Caster (Degrees) | -0.1 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| P20/30 (W/ Dual Wheels & W/out I-Beam Suspension Or Hydraulic Drum Or Disc Brakes) | |||
| Axle Gap (2 Inches) | |||
| Caster (Degrees) | 2.5 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/4 Inches) | |||
| Caster (Degrees) | 2.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/2 Inches) | |||
| Caster (Degrees) | 1.9 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 3/4 Inches) | |||
| Caster (Degrees) | 1.6 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 Inches) | |||
| Caster (Degrees) | 1.3 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/4 Inches) | |||
| Caster (Degrees) | 1.1 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/2 Inches) | |||
| Caster (Degrees) | .8 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 3/4 Inches) | |||
| Caster (Degrees) | 0.5 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 Inches) | |||
| Caster (Degrees) | 0.3 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/4 Inches) | |||
| Caster (Degrees) | 0 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/2 Inches) | |||
| Caster (Degrees) | -0.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 3/4 Inches) | |||
| Caster (Degrees) | -0.4 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| P20/30 (W/ Hydraulic Drum Or Disc Brakes & W/out I-Beam Suspension) | |||
| Axle Gap (2 Inches) | |||
| Caster (Degrees) | 3.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/4 Inches) | |||
| Caster (Degrees) | 2.9 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 1/2 Inches) | |||
| Caster (Degrees) | 2.6 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (2 3/4 Inches) | |||
| Caster (Degrees) | 2.4 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 Inches) | |||
| Caster (Degrees) | 2.1 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/4 Inches) | |||
| Caster (Degrees) | 1.8 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 1/2 Inches) | |||
| Caster (Degrees) | 1.5 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (3 3/4 Inches) | |||
| Caster (Degrees) | 1.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 Inches) | |||
| Caster (Degrees) | 1 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/4 Inches) | |||
| Caster (Degrees) | .7 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 1/2 Inches) | |||
| Caster (Degrees) | 0.5 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (4 3/4 Inches) | |||
| Caster (Degrees) | 0.2 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (5 Inches) | |||
| Caster (Degrees) | -0.1 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (5 1/4 Inches) | |||
| Caster (Degrees) | -0.3 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (5 1/2 Inches) | |||
| Caster (Degrees) | -0.5 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| Axle Gap (5 3/4 Inches) | |||
| Caster (Degrees) | -0.7 | ||
| Camber (Degrees) | 0.25 | ||
| Toe-in (Inches) | 3/16 in | ||
| P20/30 (Vehicles W/ I-Beam Suspension) | |||
| Axle Gap (N/A) | |||
| Caster (Degrees) | +5 | ||
| Camber (Degrees) | +1.5 | ||
| Toe-in (Inches) | 1/8 in | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.