Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Air Cleaner - Thermostatic: Operation
When temperature of air entering air cleaner is less than setting of temperature sensor, sensor closes. This allows engine vacuum to operate vacuum motor, which closes damper assembly to outside air. Heated air is then drawn from around exhaust manifold, through heat shroud and into air cleaner.
As air inside air cleaner warms, sensor valve begins to open. This bleeds off vacuum to vacuum motor. As vacuum to vacuum motor drops, air control door begins to open. This allows outside air to enter air cleaner. When air entering air cleaner reaches a specified temperature, air control door opens completely, thus closing off supply of heated air from around exhaust manifold.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.