Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1987CAPRICE CLASSIC, 4D WAGONREPAIR AND DIAGNOSIS (SINGLE PAGE)SUSPENSIONWHEEL ALIGNMENTWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES (RWD)ALIGNMENT SPECIFICATIONSWAGON
1987 Chevrolet Caprice Classic, 4D Wagon
Alignment Specifications: Wagon
1987 Chevrolet Caprice Classic, 4D WagonSECTION Wagon
WHEEL ALIGNMENT SPECIFICATIONS (WAGON)
| Application | Preferred | Range |
|---|---|---|
| Camber (Degrees) Front | 13/16 | 0 to 1 5/8 |
| Camber (Degrees) Rear | N/A | N/A |
| Caster (Degrees) Front | 2 13/16 | 1 13/16 to 3 13/16 |
| Caster (Degrees) Rear | N/A | N/A |
| Toe-In (Inches) Front | 1/16 | -1/32 to 5/32 |
| Toe-In (Inches) Rear | N/A | N/A |
| Toe-In (Millimeters) Front | 1.6 | -.8 to 4.0 |
| Toe-In (Millimeters) Rear | N/A | N/A |
| Toe-In (Degrees) Front | 1/8 | -1/16 to 5/16 |
| Toe-In (Degrees) Rear | N/A | N/A |
| Steering Axis Inclination (SAI) | 10 13/16° | N/A |
| Wheelbase (Inches) | 115.9 | N/A |
| Wheelbase (Millimeters) | 2944 | N/A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.