Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Fuel Pump: Description
All fuel pumps will be either the mechanical or electrically operated design. Most carbureted vehicles use an engine-mounted mechanical pump. On some General Motors vehicles, an electric supply pump is used in conjunction with the mechanical pump to assist in avoiding vapor lock in high temperatures. Also used is an extra connection for fuel and vapor return. This feature will assist in hot starting by preventing vapor lock.
Gasoline engine vehicles with fuel injection use an electric fuel pump to supply higher pressure demands required with these systems. Electric fuel pumps are normally located in or near the fuel tank. Some models use a low pressure and a high pressure electric pump. Generally, one pump will be located in the fuel tank, and the other externally. This provides adequate fuel delivery during high demand maneuvers and on steep inclines when the fuel tank is near empty.
When trouble shooting fuel pumps, remember that electric fuel pumps do not operate unless a reference signal is received from the distributor. Verify that the unit has enough pressure, volume, and vacuum (suction). When found defective, it is recommended that the fuel pump be replaced as an assembly.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.