SYS.OK|MANUAL.DB● LIVE
1986 Chevrolet Caprice Classic, 2D Coupe, 5.0 H

Quick Lookups: Fluids

1986 Chevrolet Caprice Classic, 2D Coupe, 5.0 HSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 3.50 LBS. 1.58 KG R-12 S
Automatic Transmission Fluid N/A N/A Automatic Transmission Fluid DEXRON VI Refer to TSB No. 04-07-30-037C, Date of Issue: April 11, 2007. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant 5.0L Eng,Eng VIN H Heavy Duty with A/C 17.40 QTS. 16.46 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant 5.0L Eng,Eng VIN H Standard 16.80 QTS. 15.89 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant 5.0L Eng,Eng VIN H w/Air Cond 16.70 QTS. 15.8 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Coolant 5.0L Eng,Eng VIN H w/Heavy Duty Cooling 17.50 QTS. 16.56 L 50/50 mixture of Ethylene Glycol Base Antifreeze and water GM Specification 1825-M. S
Engine Oil 5.0L Eng 5.00 QTS. 4.73 L SAE 5W-30 (60Deg.F to below 0Deg.F), 10W-30 (Preferred) (0Deg.F to over 100Deg.F), 15W-40 (10Deg.F to over 100Deg.F), 20W-20 (20Deg.F to over 100Deg.F), 30 (40Deg.F to over 100Deg.F) S
Engine Oil 5.0L Eng w/o Filter 4.00 QTS. 3.78 L SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F), 30 (40Deg.F to Above 100Deg.F) S
Fuel Tank Coupe 25.00 GALS. 94.63 L S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 1050017. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.