SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1986CAMARO BASE, 2.8 S, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEM2.5L TBI TESTS W/CODESTROUBLE CODE COMPONENT IDENTIFICATION
1986 Chevrolet Camaro Base, 2.8 S, Standard

Trouble Code Component Identification

1986 Chevrolet Camaro Base, 2.8 S, StandardSECTION Trouble Code Component Identification
ECM TROUBLE CODE IDENTIFICATION

Code Circuit Affected
12 (1)
13 Open oxygen sensor circuit.
14 Coolant sensor circuit shorted.
15 Coolant sensor circuit open.
21 TPS signal voltage high.
22 TPS signal voltage low.
23 M/C solenoid circuit open or grounded.
24 VSS circuit.
24B Park/Neutral Switch.
25 MAT sensor signal voltage low.
31 Wastegate solenoid.
32 BARO sensor circuit.
33 MAF sensor Frequency high.
34 MAF sensor Frequency low.
35 ISC switch circuit shorted.
41 No distributor reference circuit.
42 EST circuit.
43 ESC retard signal too low.
44 Lean oxygen sensor value.
45 Rich oxygen sensor value.
51 Faulty PROM, PROM installation or ECM.
52 Faulty CALPAC.
53 EGR vacuum control (carb. models).
54 M/C solenoid high (carb. models).
55 Faulty ECM.
(1) "12" will display only if no reference pulses are received by the ECM; it will never be stored as a malfunction.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.