Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Chart C1 - ECM Replacement Check Chart
In order to reduce incidents of repeat ECM failure, a revised ECM diagnostic procedure is available. Beginning in 1982, most ECMs are equipped with Integrated Circuits (IC) in place of separate transistors to operate various controlled components.
These ICs, called Quad-Drivers (QDR), have 4 separate outputs, meaning that each QDR can operate up to 4 different components. An inoperative QDR can result in ECM output becoming open or shorted to ground. Often, all 4 outputs of a QDR will fail, even if just one QDR circuit is faulty.
Refer to the following tables to determine which ECMs contain QDRs. Since this procedure is not applicable to ECMs which do not contain QDRs, those ECMs are not listed.
Performing the diagnostic flow chart will identify an inoperative QDR. Once the circuit is identified, it must be repaired to eliminate repeat ECM failure. This diagnostic procedure must be used when "Replace ECM" is the conclusion of any procedure.
| Application | Output Terminals | ||
|---|---|---|---|
| 1984-85 | |||
| 1226458, 1226460 | |||
| QDR No. 1 | C1, C2, A2, A3 | ||
| QDR No. 2 | A4, A5, A7, A7 | ||
| Application | Output Terminals | ||
|---|---|---|---|
| 1983-84 | |||
| 1226153, 1226452, 12266454, 1226455. 1226519 | |||
| QDR No. 1 | G, E, 6, 4 | ||
| QDR No. 2 | 8, 19, P, P | ||
| QDR No. 3 | 18, 18, T, T | ||
| 1985-87 | |||
| 226457, 1226519, 1226865, 1226866, 1227076, 1227169, 1227301, 1227855, 1228079 | |||
| QDR No. 1 | G, E, 6, 4 | ||
| QDR No. 2 | 8, 19, P, P | ||
| QDR No. 3 | 18, 18, T, T | ||
| Application | Output Terminals | ||
|---|---|---|---|
| 1984-85 | |||
| 1226461 | |||
| QDR No. 1 | A2, A4, A4, A5 | ||
| QDR No. 2 | A3, A3, D2, D2 | ||
| QDR No. 3 | A7, A7, C2 | ||
| 1985-87 | |||
| 1226869, 1226870, 1226948, 1227065, 1227784 | |||
| QDR No. 1 | A2, A4, A4, A5 | ||
| QDR No. 2 | A3, A3, D2, D2 | ||
| QDR No. 3 | C2, A7, A7 | ||
| 1986 | |||
| 1227151 | |||
| QDR No. 1 | C1, C2, A2, A3 | ||
| QDR No. 2 | A4, A5, A7, A7 | ||
| 1986-87 | |||
| 1227153, 1227170, 1227302 | |||
| QDR No. 1 | A2, A4, A4, A5 | ||
| QDR No. 2 | A3, A3, D2, D2 | ||
| QDR No. 3 | A7, A7, C2 | ||
| 1227165 | |||
| QDR No. 1 | A3, A7, C2, D12 | ||
| QDR No. 2 | A2, A4, A5, C1 | ||
| 1985-87 | |||
| 1226459 | |||
| QDR No. 1 | A3, A3, D3, D3 | ||
| QDR No. 2 | A7, A7, D2 | ||
| QDR No. 3 | A2, A4, A4, A5 | ||
| 1227730 | |||
| QDR No. 1 | E7, E8, E9, F7 | ||
| QDR No. 2 | F1, F2, F3, F4 | ||
| QDR No. 3 | F5, F5, F6, F8 | ||
| 1986-87 | |||
| 1227057 | |||
| QDR No. 1 | A3, A7, D2, D3 | ||
| QDR No. 2 | A4, A5, B2, B9 | ||
| 1227148, 1227783, 1227886 | |||
| QDR No. 1 | A3, A3, D3, D3 | ||
| QDR No. 2 | A7, A7, A8, D2 | ||
| QDR No. 3 | A2, A4, A4, A5 | ||
| 1987 | |||
| 1227750 | |||
| QDR No. 1 | 2A1, 2A8, 2A10, 2A11 | ||
| QDR No. 2 | 3C7, 3C8, 3C9, 3C10 | ||
| QDR No. 3 | 3D5, 3D5, 3D4, 3C6 | ||
| QDR No. 4 | 3C4, 3C4, 3C5, 3D4 | ||
| Application | (1) Output Terminals | ||||
|---|---|---|---|---|---|
| 1983-87 | |||||
| 1225610, 1226100, 1226026, 1226430 | |||||
| QDR No. 1 | Black 9, Black 14, Black 16, White 20 | ||||
| QDR No. 2 | Black 7, Black 22, White 19, White 19 | ||||
| 1226026, 1226430 | |||||
| QDR No. 1 | Black 9, Black 14, Black 16, White 20 | ||||
| QDR No. 2 | Black 7, Black 22, White 19, White 19 | ||||
| 1226156 | |||||
| QDR No. 1 | White 20, Black 7, Black 9 | ||||
| 1226864 | |||||
| QDR No. 1 | Black 7, Black 9, White 20 | ||||
| 1226867 | |||||
| QDR No. 1 | A2, A3, A4, C2 | ||||
| QDR No. 2 | C1, A5, A7, A7 | ||||
| 1226868, 1227746, 1227747 | |||||
| QDR No. 1 | A2, A3, C1, C2 | ||||
| QDR No. 2 | A4, A5, A7, A7 | ||||
| 1227137, 1227429 | |||||
| QDR No. 1 | A2, A3, C1, C2 | ||||
| QDR No. 2 | A4, A5, A7, A7 | ||||
| 1227748 | |||||
| QDR No. 1 | Black 7, Black 7, Black 18, White 18 | ||||
| QDR No. 2 | Black 3, Black 4, White 21, White 22 | ||||
| 1227749 | |||||
| QDR No. 1 | E7, E8, E9, F7 | ||||
| QDR No. 2 | F1, F2, F3, F4 | ||||
|
|||||
| Application | (1) Output Terminals | ||||
|---|---|---|---|---|---|
| 1983-86 | |||||
| 1226028, 1226462, 1226930 | |||||
| QDR No. 1 | Blue 9, Blue 14, Blue 16, Red 20 | ||||
| QDR No. 2 | Blue 7, Blue 22, Red 19, Red 19 | ||||
| 1986-87 | |||||
| 1227056 | |||||
| QDR No. 1 | A7, A7, A11, A11 | ||||
| QDR No. 2 | A2, A5, C3, C3 | ||||
| QDR No. 3 | C1, D2, D3, D10 | ||||
| QDR No. 4 | A3, A3, A4, A4 | ||||
|
|||||
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.