Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1985CHEVY VAN G20, 6.2 C, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 33 (ENGINE CONTROLS - REMOVE/INSTALL/OVERHAUL)POWERTRAIN CONTROL MODULE (PCM)PROGRAMMABLE READ-ONLY MEMORY (PROM)REMOVAL
1985 Chevrolet Chevy Van G20, 6.2 C, Standard
Programmable Read-Only Memory (Prom): Removal
1985 Chevrolet Chevy Van G20, 6.2 C, StandardSECTION Removal
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Rally Camper Special, 1994 GMC Rally, and 1994 GMC Forward Control. However, it is still accessible from the selected car via links, so may be relevant.
- Remove PCM from vehicle. See REMOVAL under CONTROL UNIT . Position PCM so bottom cover is facing upward. Remove slide-off PROM access cover by depressing locking tab.
- Using PROM removal tool, grasp PROM at narrow ends. Gently rock PROM from end to end while pulling up. If installing new PROM, remove old PROM from PROM carrier.
NOTE:
Note reference notch locations in PROM, carrier and PCM for reassembly reference.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.