Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Catalytic Converter
The 3-way catalytic converter with a dual bed is used to reduce exhaust emissions. This type of converter can reduce hydro- carbons (HC), carbon monoxide (CO) and oxides of nitrogen (NOx).
The upstream section of the converter contains a reducing/oxidizing bed to reduce NOx while at the same time oxidizing HC and CO. An air supply pipe from the AIR system injects air between the beds of the converter. This is so the second converter bed can oxidize any remaining HC and CO to efficiently reduce exhaust emissions.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.