Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1985BLAZER 5.0 H, STANDARD, MY6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 36 (SERVICING - M/T)LUBRICATIONCHECKING FLUID LEVELTRANSFER CASE
1985 Chevrolet Blazer 5.0 H, Standard, MY6
Transfer Case
1985 Chevrolet Blazer 5.0 H, Standard, MY6SECTION Transfer Case
WARNING: This page is about a different car, the 1990 Dodge Ram Wagon, 1990 Dodge Ram Van, 1990 Dodge Pickup, 1990 Dodge Dakota, and 1990 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
With vehicle in level position remove filler plug and check fluid level. If level is below bottom of filler plug hole, add lubricant to bottom of filler hole.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.