SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET1983SUBURBAN C20, 5.7 M, STANDARDREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSOVERHAUL & TESTING - 700-R4/4L60TRANSMISSION REASSEMBLY2-4 BAND & SERVO ASSEMBLY
1983 Chevrolet Suburban C20, 5.7 M, Standard

2-4 Band & Servo Assembly

1983 Chevrolet Suburban C20, 5.7 M, StandardSECTION 2-4 Band & Servo Assembly
  1. Install 2-4 band in case. Align band anchor pin end with case pin hole. Install band anchor pin in case. Ensure band anchor pin aligns with end of 2-4 band.
  2. Install 2-4 servo assembly into case, and index apply pin on band end. Check for proper engagement of apply pin on band end. Recheck 2-4 servo apply pin selection to ensure correct pin is installed. See CHECKING SERVO PIN LENGTH  under TRANSMISSION DISASSEMBLY. Different length servo pins are available. See SERVO PIN SPECIFICATIONS  . Select proper length servo pin.
    SERVO PIN SPECIFICATIONS

    Pin ID Pin Length: In. (mm)
    2 Rings 2.61-2.62 (66.3-66.5)
    3 Rings 2.67-2.68 (67.8-68.1)
    Wide Band 2.72-2.73 (69.1-69.3)
  3. Install servo cover and "O" ring. Install Servo Cover Compressor (J-29714), and compress cover. Install cover retaining ring, indexing ring ends with slot in case.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.